4mm Poplar Plywood

Item	B/BB Grade Bleached Poplar Plywood
Size	1220x2440mm/1250x2500mm/1220x2500mm or as requested
Thickness	2.5mm-30mm
Grade	B/BB, BB/BB, BB/CC
Core veneer	Full Poplar/Eucalyptus/Hardwood core
Sanding	Core veneer/Face/back sanding
Thickness of Tolerance	+/-0.2mm (thickness<6mm), +/-0.3~0.5mm (thickness≥6mm)
Glue	CARB P2/EPA, E0/E1/E2 for interior usage
	MR,Melamine and WBP Phenolic for exterior usage
Moisture Content	8%~12%(Depend on thickness)
Certificated by	FSC, CE, CARB P2/EPA, ISO
Technical parameters	Water Absorption-≤10%
	Modulus of Elasticity- ≥5000Mpa
	Static Bending Strength ≥30Mpa
	Surface Bonding Strength≥1.60Mpa
	Screw Holding Ability, Face ≥1900N
	Internal Bonding Strength≥0.90Mpa
Usage	For furniture, cabinets making.
Standard Exported Packing	Plywood Packing: Inner with plastic bags, then covered by plywood. Fasten by steel belt
	Carton Packing: Inner with plastic bags, then covered by carton. Fasten by steel belt

 

 

The poplar plywood panel is made usually with an odd number of poplar veneers glued together and with cross-bonded fibres. The wood grain runs longitudinally and transversally in the outer faces.

 

Upon request, we can make panels with unidirectional (lamellar) grain.

1). Plywood for: Motorhomes and caravans, boat building, construction, design, DIY, packaging, and furniture.

2). Applications: Ideal for floorings, furniture, doors and windows, fittings, woodworking (even large-scale), educational material, hobbies, carpentry, and packaging.

3). Features: Lightweight/ Compact/ Stable/ Flexible/ Available in different sizes and thickness/ Easy to cut and machine

4). Bonding Class 1: for use in dry places.

Class 2: for use in moist places.

Class 3: for outdoor use.

5). Standards: UNI EN 636-1/ UNI EN 636-2/ UNI EN 636-3

 

 

 

 

 

Poplar veneer - EN 635-2 Class I (AB)

 

Faces that may remain visible - ideal for any type of finishing, i.e. clear coatings such as varnishes & lacquer, or pigmented finishes such as paints & laminates.

May contain a few pin knots or healthy & live knots without cracks, small, well-done putty repair work that blends well with the rest of the surface, and very light discolouration

 

Poplar veneer - EN 635-2 Class II (B)

 

Natural face with colour variations and healthy knots, suitable for coating with laminates, paints or varnishes.

May contain healthy, live knots up to 35mm diameter and small knotholes or cracks, so long as good repairs have been made.

May also contain light discolouration and some limited glue stains and good repairs

 

Poplar veneer - EN 635-2 Class III (BB)

 

Commercial face with putty work performed - ideal for non-visible uses and overlaying with laminates and veneers.

May contain healthy knots up to 50mm diameter, small loose knots, cracks, bark and overlapping.

May also include natural discolouration, glue stains, repairs and any form of putty work and repairs.

 

Poplar veneer - EN 635-2 Class IV (C)

 

Plywood face designed for packaging and similar uses.

May contain all the natural wood characteristics and various processing defects, provided these do not compromise the functions of the plywood. (NB: The presence of fungi and metal parts is not allowed)